The original, best-selling formula of Permalac.

  • Permalac Original is a protective, water-clear, fast-drying, solvent-based lacquer coating. It is a direct-to-substrate (DTS) coating, meaning it is designed to be applied to a myriad of surfaces directly without the use of a primer. Permalac’s state-of-the-art UV and corrosion inhibitors, as well as wide-ranging temperature stabilizers, assure endurance in the harshest conditions ranging from arctic freezing to desert heat, to beachfront salt air to acid rain. You can apply it to most metal, wood, or stone surfaces whether the surfaces are bare or painted. Permalac can behave as both a sealer (in case you decide to paint over it) or as a highly resistant topcoat, providing protection from all types of environmental corrosives. It has outstanding adhesion to a variety of substrates, including patinated and polished metals (copper, brass, bronze, steel, aluminum, zinc, etc.), hard woods, fiberglass, and masonry or stone products in both land and marine applications. On metals, Permalac is flexible and does not separate when the metal is bent. It also provides absolute protection for circuit breakers and other electrical components from molds and mildew, helping to avoid short-circuiting and other disruptive difficulties. Permalac can be sprayed or brushed on and, can be used in interior or exterior applications. It is available in either satin or matte sheens. We cannot ship Permalac Original products to California. Please order Permalac EF or Permalac NT instead. 
  • Permalac Original is a protective, water-clear, fast-drying, solvent-based lacquer coating. It is a direct-to-substrate (DTS) coating, meaning it is designed to be applied to a myriad of surfaces directly without the use of a primer. Permalac’s state-of-the-art UV and corrosion inhibitors, as well as wide-ranging temperature stabilizers, assure endurance in the harshest conditions ranging from arctic freezing to desert heat, to beachfront salt air to acid rain. You can apply it to most metal, wood, or stone surfaces whether the surfaces are bare or painted. Permalac can behave as both a sealer (in case you decide to paint over it) or as a highly resistant topcoat, providing protection from all types of environmental corrosives. It has outstanding adhesion to a variety of substrates, including patinated and polished metals (copper, brass, bronze, steel, aluminum, zinc, etc.), hard woods, fiberglass, and masonry or stone products in both land and marine applications. On metals, Permalac is flexible and does not separate when the metal is bent. It also provides absolute protection for circuit breakers and other electrical components from molds and mildew, helping to avoid short-circuiting and other disruptive difficulties. Permalac can be sprayed or brushed on and, can be used in interior or exterior applications. It is available in either satin or matte sheens. We cannot ship Permalac Original products to California. Please order Permalac EF or Permalac NT instead. 
  • Permalac Original is a protective, water-clear, fast-drying, solvent-based lacquer coating. It is a direct-to-substrate (DTS) coating, meaning it is designed to be applied to a myriad of surfaces directly without the use of a primer. Permalac’s state-of-the-art UV and corrosion inhibitors, as well as wide-ranging temperature stabilizers, assure endurance in the harshest conditions ranging from arctic freezing to desert heat, to beachfront salt air to acid rain. You can apply it to most metal, wood, or stone surfaces whether the surfaces are bare or painted. Permalac can behave as both a sealer (in case you decide to paint over it) or as a highly resistant topcoat, providing protection from all types of environmental corrosives. It has outstanding adhesion to a variety of substrates, including patinated and polished metals (copper, brass, bronze, steel, aluminum, zinc, etc.), hard woods, fiberglass, and masonry or stone products in both land and marine applications. On metals, Permalac is flexible and does not separate when the metal is bent. It also provides absolute protection for circuit breakers and other electrical components from molds and mildew, helping to avoid short-circuiting and other disruptive difficulties. Permalac can be sprayed or brushed on and, can be used in interior or exterior applications. It is available in either satin or matte sheens. We cannot ship Permalac Original products to California. Please order Permalac EF or Permalac NT instead. 
  • Permalac Original is a protective, water-clear, fast-drying, solvent-based lacquer coating. It is a direct-to-substrate (DTS) coating, meaning it is designed to be applied to a myriad of surfaces directly without the use of a primer. Permalac’s state-of-the-art UV and corrosion inhibitors, as well as wide-ranging temperature stabilizers, assure endurance in the harshest conditions ranging from arctic freezing to desert heat, to beachfront salt air to acid rain. You can apply it to most metal, wood, or stone surfaces whether the surfaces are bare or painted. Permalac can behave as both a sealer (in case you decide to paint over it) or as a highly resistant topcoat, providing protection from all types of environmental corrosives. It has outstanding adhesion to a variety of substrates, including patinated and polished metals (copper, brass, bronze, steel, aluminum, zinc, etc.), hard woods, fiberglass, and masonry or stone products in both land and marine applications. On metals, Permalac is flexible and does not separate when the metal is bent. It also provides absolute protection for circuit breakers and other electrical components from molds and mildew, helping to avoid short-circuiting and other disruptive difficulties. Permalac can be sprayed or brushed on and, can be used in interior or exterior applications. It is available in either satin or matte sheens. We cannot ship Permalac Original products to California. Please order Permalac EF or Permalac NT instead. 
  • Are you looking for an easy and quick way to blacken your metal without using patinas or acid? Look no further than Permalac Original Blackener! This transparent black lacquer coating has been formulated in our award-winning clear Permalac base with a unique blend of tint and stabilizers to make it perform at its best. It's buildable, quick-drying, and easy to apply and remove. It darkens as you use more coats. With Permalac Original Blackener, you can achieve a blackened steel or anodized look on various substrates such as copper, brass, bronze, steel, aluminum, and zinc. Plus, it's a one-stop solution to blacken and seal your metal. Available in satin and matte finishes in the Permalac Original line. NOTE: Due to state regulations, Permalac Original Blackener cannot be shipped to California. California residents should order Permalac NT Blackener. Safety and technical data pages are available here. Certificates of analysis are available here.
  • Are you looking for an easy and quick way to blacken your metal without using patinas or acid? Look no further than Permalac Original Blackener! This transparent black lacquer coating has been formulated in our award-winning clear Permalac base with a unique blend of tint and stabilizers to make it perform at its best. It's buildable, quick-drying, and easy to apply and remove. It darkens as you use more coats. With Permalac Original Blackener, you can achieve a blackened steel or anodized look on various substrates such as copper, brass, bronze, steel, aluminum, and zinc. Plus, it's a one-stop solution to blacken and seal your metal. Available in satin and matte finishes in the Permalac Original line. NOTE: Due to state regulations, Permalac Original Blackener cannot be shipped to California. California residents should order Permalac NT Blackener.
    Safety and technical data pages are available here. Certificates of analysis are available here.
  • Permalac Original Black is an opaque black acrylic lacquer designed to yield a rich, dark tint when applied to any metal, wood, stone, or concrete substrate. It is a 2-in-1 product that combines a "cast iron" black look with the durability and protection of our award-winning clear Permalac base. It is fast-drying, easy to apply, and highly resistant to environmental breakdown caused by UV, acid rain, and salt. It has outstanding adhesion to various substrates, including patinated and polished metals, hardwood, masonry, or stone products. Users report excellent results on copper, brass, bronze, steel, aluminum, zinc, and painted wood substrates. It is available in satin and matte sheens in the Permalac Original line. We cannot ship Permalac Original products to California. Please order Permalac EF or Permalac NT instead.  Safety and technical data pages are available here. Certificates of analysis are available here.
  • Permalac Original Black is an opaque black acrylic lacquer designed to yield a rich, dark tint when applied to any metal, wood, stone, or concrete substrate. It is a 2-in-1 product that combines a "cast iron" black look with the durability and protection of our award-winning clear Permalac base. It is fast-drying, easy to apply, and highly resistant to environmental breakdown caused by UV, acid rain, and salt. It has outstanding adhesion to various substrates, including patinated and polished metals, hardwood, masonry, or stone products. Users report excellent results on copper, brass, bronze, steel, aluminum, zinc, and painted wood substrates. It is available in satin and matte sheens in the Permalac Original line. We cannot ship Permalac Original products to California. Please order Permalac EF or Permalac NT instead.  Safety and technical data pages are available here. Certificates of analysis are available here.
  • Permalac Original is a protective, water-clear, fast-drying, solvent-based lacquer coating. It is a direct-to-substrate (DTS) coating, meaning it is designed to be applied to a myriad of surfaces directly without the use of a primer. Permalac’s state-of-the-art UV and corrosion inhibitors, as well as wide-ranging temperature stabilizers, assure endurance in the harshest conditions ranging from arctic freezing to desert heat, to beachfront salt air to acid rain. You can apply it to most metal, wood, or stone surfaces whether the surfaces are bare or painted. Permalac can behave as both a sealer (in case you decide to paint over it) or as a highly resistant topcoat, providing protection from all types of environmental corrosives. It has outstanding adhesion to a variety of substrates, including patinated and polished metals (copper, brass, bronze, steel, aluminum, zinc, etc.), hard woods, fiberglass, and masonry or stone products in both land and marine applications. On metals, Permalac is flexible and does not separate when the metal is bent. It also provides absolute protection for circuit breakers and other electrical components from molds and mildew, helping to avoid short-circuiting and other disruptive difficulties. Permalac can be sprayed or brushed on and, can be used in interior or exterior applications. It is available in either satin or matte sheens. We cannot ship Permalac Original products to California. Please order Permalac EF or Permalac NT instead. 
  • Permalac Original is a protective, water-clear, fast-drying, solvent-based lacquer coating. It is a direct-to-substrate (DTS) coating, meaning it is designed to be applied to a myriad of surfaces directly without the use of a primer. Permalac’s state-of-the-art UV and corrosion inhibitors, as well as wide-ranging temperature stabilizers, assure endurance in the harshest conditions ranging from arctic freezing to desert heat, to beachfront salt air to acid rain. You can apply it to most metal, wood, or stone surfaces whether the surfaces are bare or painted. Permalac can behave as both a sealer (in case you decide to paint over it) or as a highly resistant topcoat, providing protection from all types of environmental corrosives. It has outstanding adhesion to a variety of substrates, including patinated and polished metals (copper, brass, bronze, steel, aluminum, zinc, etc.), hard woods, fiberglass, and masonry or stone products in both land and marine applications. On metals, Permalac is flexible and does not separate when the metal is bent. It also provides absolute protection for circuit breakers and other electrical components from molds and mildew, helping to avoid short-circuiting and other disruptive difficulties. Permalac can be sprayed or brushed on and, can be used in interior or exterior applications. It is available in either satin or matte sheens. We cannot ship Permalac Original products to California. Please order Permalac EF or Permalac NT instead. 
  • Are you looking for an easy and quick way to blacken your metal without using patinas or acid? Look no further than Permalac Original Blackener! This transparent black lacquer coating has been formulated in our award-winning clear Permalac base with a unique blend of tint and stabilizers to make it perform at its best. It's buildable, quick-drying, and easy to apply and remove. It darkens as you use more coats. With Permalac Original Blackener, you can achieve a blackened steel or anodized look on various substrates such as copper, brass, bronze, steel, aluminum, and zinc. Plus, it's a one-stop solution to blacken and seal your metal. Available in satin and matte finishes in the Permalac Original line. NOTE: Due to state regulations, Permalac Original Blackener cannot be shipped to California. California residents should order Permalac NT Blackener.

    Safety and technical data pages are available here. Certificates of analysis are available here.
  • Are you looking for an easy and quick way to blacken your metal without using patinas or acid? Look no further than Permalac Original Blackener! This transparent black lacquer coating has been formulated in our award-winning clear Permalac base with a unique blend of tint and stabilizers to make it perform at its best. It's buildable, quick-drying, and easy to apply and remove. It darkens as you use more coats. With Permalac Original Blackener, you can achieve a blackened steel or anodized look on various substrates such as copper, brass, bronze, steel, aluminum, and zinc. Plus, it's a one-stop solution to blacken and seal your metal. Available in satin and matte finishes in the Permalac Original line. NOTE: Due to state regulations, Permalac Original Blackener cannot be shipped to California. California residents should order Permalac NT Blackener.

    Safety and technical data pages are available here. Certificates of analysis are available here.

Title

Go to Top