Peacock Labs has developed a new high solids, low VOC, lacquer specifically for protecting and sealing floors. Permalac EF FloorCoat can be used on a variety of floor types, from hardwood, to concrete. It’s water clear, non yellowing, and resistant to ultraviolet. The coating is durable enough to take fork-lift traffic (watch the video below) and has a fast and easy application.
Permalac EF FloorCoat can be applied with a T-Bar or fleece applicator. It can be applied over oil based stain. Three coats will bring the finish to a semi gloss and give a total coating thickness of 5 mil. Allow one hour between the first coat and the second coat, and two hours between the second coat and third coat. The third coat of Permalac EF FloorCoat will be ready for light use within two hours. It will be ready for normal use after 24 hours.
For more information call Peacock Labs at 215 729 4400
For more information call Peacock Labs at 215 729 4400
 |
| Permalac EF FloorCoat on concrete |
 |
| Permalac EF FloorCoat on oak |
How about patios?
Hi James,
Unfortunately, we had to discontinue the Permalac EF Floorcoat several years back. Although it may have been good to use on patios, we no longer have that product or a direct replacement available at this time. We apologize for the inconvenience.
Peacock Labs