Permalac Blackener is our original formula Permalac Lacquer with a transparent black tint added. This allows you to seal and blacken your metal in one step, no patina chemicals required. Use it to easily and quickly create a blackened steel or anodized look. One quart will cover approximately 100 square feet with a single coat.
NOTE: Due to state regulation, Permalac Blackener cannot be shipped to California. California residents should order Permalac NT Blackener.
This is a special bundle of four 1-gallon cans
Use Permalac Blackener just as you would Permalac. The substrate should be clean and dry before application. Wipe the surface clean with a acetone. For best results, a spray application is recommended. A minimum of three total coats is recommended. Apply thin coats for an even finish. Thin the first coat 1:1 with lacquer thinner such as #69. Thin each additional coat 4:1. Each additional coat will increase the blackening effect. If a lighter finish is desired you may wish to get some clear Permalac to use as a top coat. Use lacquer thinner or acetone to clean equipment.
UPS requires an additional hazardous materials fee for each bundle, as well as special spill-resistant packaging. The $55 fee for these will be added in the cart.